Samsung Galaxy S6 5.1.1 firmware-flash-file-Without-Password-100%-Tested-Free-Download

Samsung Galaxy S6 5.1.1 firmware-flash-file-Without-Password-100%-Tested-Free-Download 

G920FXXU2BOFJ 5.1.1 Galaxy S6 (SM-G920F) Stock Firmware

Galaxy S6 SM-G920F Android 5.1.1 firmware build version G920FXXU2BOFJ . This is the first official Android 5.1.1 update released on June 2015 and initially available in France. This update might continues to roll out in Europe. This stock firmware is 

only for those who might want to manually upgrade to G920FXXU2BOFJ 5.1.1, especially those who have rooted and modified Galaxy S6, you may download the stock firmware.

Technical details of G920FXXU2BOFJ / Android 5.1.1 Lollipop:

Device name: Galaxy S6
Model number: SM-G920F
Android version: 5.1.1
Baseband version: G920FXXU2BOFJ
Kernel Version: 3.10.61-5012324
Build Number: LMY47X.G920FXXU2BOFJ
AP: G920FXXU2BOFJ
CP: G920FXXU2BOFJ
CSC: G920FOXA2BOFJ
Here is the actual screenshot of a Galaxy S6 that runs in Android 5.0.2 Lollipop G920FXXU2BOFJ stock firmware. This will serve as your guide and let you know what build version you are about to download. This details can be viewed in the device settings, from the Home Menu>>Settings>>About Device.

Download Galaxy S6 SM-G920F Firmware Stock Android 5.1.1 / G920FXXU2BOFJ

For removing root and restoring your Galaxy S6 SM-G920F to official and factory default settings. Just grab the stock firmware package that matches and signifies your country of origin and or network provider. Once your galaxy s6 has returned back to official firmware, your will then be able to get the new release version of software update again, either via Over-The-Air OTA update or using Smart Switch.
Important note: Always flash and use the most latest stock firmware. Do not use these firmware package for downgrading purposes or else otherwise your device OS will be outdated.
Please check this page for the latest stock firmware update: Galaxy S6 SM-G920F stock firmware

COUNTRY/CARRIER	CSC	FIRMWARE
Austria	ATO	(link)
Austria (3)	DRE	(link)
Baltic States	SEB	(link)
Belgium	PRO	(link)
Bulgaria	BGL	(link)
Bulgaria (Glubol)	GBL	(link)
Bulgaria (Vivacom)	VVT	(link)
Caucasus	CAU	(link)
Croatia	TWO	(link)
Czech Republic	ETL	(link)
Germany	DBT	(link)
Germany (O2)	VIA	(link)
Greece	EUR	(link)
France	XEF	(link)
Hungary	XEH	(link)
Hungary (Telenor)	PAN	(link)
Ireland (3)	3IE	(link)
Ireland (Meteor)	MET	(link)
Italy	ITV	(link)
Italy (3)	HUI	(link)
Kazakhstan	SKZ	(link)
Macedonia/FYROM	VIM	(link)
Norway (Telenor)	TEN	(link)
Portugal	TPH	(link)
Romania	ROM	(link)
Russia	SER	(link)
Southeast Europe	SEE	(link)
Serbia	TSR	(link)
Serbia (Telenor)	MSR	(link)
Serbia (Vip)	TOP	(link)
Slovenia	SIO	(link)
Sweden (3)	HTS	(link)
Switzerland	AUT	(link)
United Kingdom	BTU	(link)
United Kingdom (3)	H3G	(link)
United Kingdom (O2)	O2U	(link)
Uzbekistan	CAC	(link)

Galaxy S6 Stock Firmware (SM-G920F)  Usage:

• Unroot Galaxy S6 SM-G920F – Can be use to remove root on Galaxy S6 if it has been rooted and modified.  The phone is technically unable to get the latest OTA update. A rooted phone will somehow get this warning message that says “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.” Just read this  guide on How to Unroot the Galaxy S6.
• Unbrick Galaxy S6 SM-G920F –  To fix soft-bricked Galaxy S6 if one have messed-up from customization like rooting, custom ROMs, modified kernels and other system images.  The stock firmware can resolve issues such as  bootloops and stuck at Samsung logo animated screen.
• Restore Galaxy S6 SM-G920F to stock official firmware – If the device runs in any modified firmware. Suitable for restoring the device to is original factory default settings.
• Upgrade Galaxy S6 SM-G920F – If one had missed the latest version of stock Android OS. Manually install the newest update if the device is rooted as there are times an unwanted issue occurs when updating via Over-The-Air (OTA) update.

Important Note before Flashing a Stock Firmware:

Backup all stored data in the device.  Though the process will not eventually deletes the stored data but we are about to touch the inner system of the phone which is crucial on some part.  If anything might go wrong and it forces you to perform a full wipe factory reset your data will be wiped out. So to make all important data safe, don’t be lazy to make a back up in the first place.
Recharge your device battery –  A sudden lose of power and power interruption will cause an undesired outcomes.
Use a PC and the supplied USB data cable of your Galaxy S6 – Oftentimes a flashing fails is caused by a bad USB data cable.
Enable USB debugging mode – Go to Settings > About device > Tap the build number around 7 times. Then hit back to Home screen, tap Apps > Settings > Developer option. Then mark USB Debugging checkbox.
Grab the right flash tools for Galaxy S6 – Only use
Odin3_v3.10.6 and the latest USB driver as the older version has caused failure for no reason.  Download Odin3_v3.10.6 here.

Flashing the G920FXXU2BOFJ 5.1.1 Stock Firmware

Run Odin3_v3.10.6. Ensure that the ‘Re-Partition’ box has no check mark on it. Leaving the ‘F-Reset’ and ‘Auto Reboot’ check boxes marked by default.
Click the ‘AP button’ in Odin3_v3.10.6, then load the tarball firmware file:  E.g. G920FXXU2BOFJ_G920FOXA2BOFJ_Home_tar.md5
Set your device in Download mode: Press and hold Volume Down,Home and Power button at the same for a couple of seconds. Then simply  press Volume Upto proceed in the download mode screen.  Then connect the phone to the computer via USB data cable.
Click the “Start button” to start flashing the stock firmware. 
Wait until it completes, but once finished you can see a message that says “PASS!” if the installation was successful or otherwise you may also get “FAIL!” if there is something went wrong. You may repeat flashing and read the procedure from top to bottom.

More FAQ’s About using Galaxy S6 Stock Firmware:

Can I use the stock firmware to unlock my Galaxy S6 so I can use it to other network provider’s SIM cards?
No, the stock firmware cannot be use and has nothing to do to unlock a Galaxy S6 device. Instead you may visit your service provider as sometimes they do the unlocking process for free.
Can I use the stock firmware to reset a tripped KNOX Warranty void counter?
No, the Stock firmware cannot be use to reset the KNOX Warranty void red-flag if it’s already tripped. It is irreversible by any means and will stay on that status.  It will just restore the device from custom to official status.
If you have any questions about the Galaxy S6 SM-G920F stock firmware, don’t hesitate to ask for our assistance.